Black and Gold Sequins become a Midi Pencil Skirt

I was very lucky to get a fabric store voucher for Mother’s Day way back when, and didn’t waste any time spending it, especially as the store was having a sale.

I came home with some things I had been eyeing for a while, especially this sequin number. Without really knowing what I was going to make with it, I purchased 1.5m, I’m not quite sure of the fabric content, it doesn’t really matter either.

Fast forward 6 months later I am finally making something with it. I didn’t want to over complicate things and make a dress, or a busy skirt, so decided on a maxi skirt. The fabric has a little stretch so I cheated by making something with an elastic waistband.

sequin skirt front

                            sequin skirt side 2 sequin skirt back 4

First I made a pattern using my waist, hip and length measurements. I used a black performance cotton lycra (90% cotton/ 10% elastane) as the lining, cut to the same measurements and constructed in the same manner as the outer fabric. I have read a million times that it is often better to remove sequins in the seam allowance before sewing but mine were not that densely packed together and I just used a heavy duty needle (denim needle) to sew and didn’t have any problems. There wasn’t a symmetrical pattern repeat so I just went with what I had.

sequin fabric

I got as far as attaching the elastic waistband and tried on the skirt and it just felt and looked BLAH!!!!! I slept on it, not sure what to do, and next morning chopped off the length to a midi version instead and narrowed the skirt by about an inch on either side seam and pegged it from hip down. I think the fabric had more stretch in it than I originally thought and just was a saggy hot mess. Probably not helped by the fact that sequin fabric has a bit of weight behind it anyway and drags.

Anyway, I cut the lining in the same way, attached a new, narrower 3cm wide black elastic waistband, and used hemming web for the sequin fabric hem. Oh my goodness, why have I never discovered this before for hemming tricky fabric, it made everything so much easier and I had a nice crisp hem. The knit lining was just cut across at the bottom and the hem left unfinished as I still wasn’t sure on how the skirt would go once worn plus it doesn’t fray, and more to the point I was finishing this up the night before wanting to wear it to a function.

Normally I like to serge the seams but I didn’t with this as I wasn’t sure if the sequins would blunt my serger blade. Also the knit lining doesn’t fray so didn’t bother with that either. For construction I used a narrow zig zag stitch with a slightly longer stitch length than normal.

sequin skirt side 3

It is a really quick garment to sew and fits like a glove once fitting issues are sorted. I feel so glamorous and glitzy for such little effort. The sequins are definitely more gold as seen in the fabric close up photo than yellow as they appear in the others.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s