I thought I’d post these two outfits here in the one post as there isn’t too much to say for either and they share the common theme of the colour pink because I happen to have girls that love pink.
First up is the lame three tier ruffle skirt. I made this outfit to match big sister at a recent family event. I used the left over japanese tissue lame in rose white (45% nylon/55% metal), pink bridal tulle, stash lace and metro linen in petal (100% linen).
The close up is a true indication of the colours.
I essentially made this skirt up as I went along. I first made the linen layer with a 103cm x 24cm rectangle joined together with french seams and finished with a machine rolled hem. Then I attached two layers of soft stretch tulle to minimise irritation against the skin. Each layer was a rectangle of 176cm x 23cm with french seams and the hem left raw. Third layer was the lame cut at a completed size of 129cm x 16cm. I had to piece this together with 3 separate pieces as I only had scraps left from the Haven dress. I french seamed the short edges and did a machine rolled hem. The final layer was some lace of a length of 129cm. As you have probably noticed, although I did try and keep consistent with the lengths of each layer, I was using stash and scrap fabric so often just went with the lengths I had. All layers were gathered individually before layering and attaching on top of one another.
The waistband was made up of two rectangles each 61cm x 8cm, joined with french seams and then attached to the skirt layers. I machine stitched the waistband on the inside leaving an opening to thread through a 47cm length of 2cm wide elastic and then machine stitched closed. It turned out pretty cute but was in desperate need of a matching top. I took the easy way out and purchase a plain white t-shirt and removed the sleeves. I added two layers of the soft stretch tulle at the upper armholes and 2 layers of thin lace at the neckline, finished off with a pink ribbon bow, all from the stash. I wanted to carry the tulle and lace them through from the skirt and think I achieved a complete outfit. I also made a matching hair clip so she was wearing handmade from top to bottom.
Outfit two is a pink jacquard satin (unknown fibre content) dress. I was originally making this for my eldest as more of a tunic but once it was finished the proportions looked off so I have kindly gifted it to my baby but it now requires some fit adjustments.
I used the purple rose party dress pattern from nestfullofeggs. For the bodice and I only extended down the length 5 inches as opposed to 6 inches as instructed. The jacquard frays so much that I serged all my individual fabric pattern pieces before even beginning construction. I chose to line the bodice and just used some stash white top pop poplin 8925 (80% poly/20% cotton) using the “bagging” method so that all seams were enclosed, and then I understitched wherever possible. I inserted a 20cm (8″) white invisible zip for the closure.
The skirt was constructed using a top and bottom ruffle layer of jacquard each 112cm long x 3 inch wide finished with a machine rolled hem. The eyelet layer was 133cm long as that was the length I had and used the entire width of the eyelet. Each layer was attached to a middle tier which was the width of the bodice of 70cm x 3 inch wide, except the top jacquard layer. Each tier/layer was closed in the round first and then attached to one another.
It probably isn’t too noticeable from the photos but the neckline is in fact too wide for this cherub and falls off her shoulders. I am contemplating how to alter the dress without having to take it apart. I am actually thinking of sewing some ribbon at the back shoulders to keep the dress from falling off until she grows a bit so she can wear this before it gets too short otherwise I may cut out a wedge from the centre back where the zip was and adding a button and loop closure. What do you suggest?